Did you know that you can recharge your BYD HAN using either a regular wall socket or a designated charging station? However, when you're out and about, public charging stations are the only option available as the former won't be sufficient. The charging duration of your electric vehicle will depend on the type of charging station or EVSE (Electric Vehicle Supply Equipment) used and its compatibility with your EV's maximum charging capacity. To make things easier for you, we've provided a chart below that includes all the charging options available for your BYD HAN, along with the estimated time required to fully charge the battery from empty.
Europe
Electric vehicle (EV) charging processes can vary across Europe depending on the country. Some European countries depend on 1-phase connections to the power grid for EV charging, while others prefer 3-phase connections. The table below shows all the charging modes that the BYD HAN EV model supports, although certain charging modes may not be available in some countries. We recommend you confirm with your local EV charging networks to find out which charging options are accessible to you.
Type 2 (Mennekes - IEC 62196)
Charging Point
Max. Power
Power
Time
Rate
Wall Plug (2.3 kW)
230V / 1x10A
2.3 kW
42h30m
11 km/h
1-phase 16A (3.7 kW)
230V / 1x16A
3.7 kW
26h30m
18 km/h
1-phase 32A (7.4 kW)
230V / 1x32A
7.4 kW
13h15m
35 km/h
3-phase 16A (11 kW)
230V / 1x16A
3.7 kW †
26h30m
18 km/h
3-phase 32A (22 kW)
230V / 1x32A
7.4 kW †
13h15m
35 km/h
† = Limited by on-board charger, vehicle cannot charge faster.
Fast Charging (10 → 80%)
Fast charging is essential for increasing the distance you can travel by quickly adding an optimal amount of range. However, it's worth noting that once your battery reaches an 80% state-of-charge, charging power will start to decrease. This means that traditional fast charging stations rarely exceed 80% SoC. The charging speed of an electric vehicle depends on the charging station used and the maximum charging power that the EV can handle. The table below provides a comprehensive overview of fast charging the BYD HAN.
Max. Power: maximum power provided by charge point
Avg. Power: average power provided by charge point over a session from 10% to 80%
Time: time needed to charge from 10% to 80%
Rate: average charging speed over a session from 10% to 80%
Note: The given energy consumption and range data, influenced by moderate driving and climate conditions, might not match actual driving experiences. Pricing info could vary across regions or markets. This site's content is for only informational purposes, not specifc advice for you.
Contact Electrly
See all photos