Are you aware that there are two ways to charge your VinFast VF 9 Standard Range? You may choose to use a regular wall plug or a charging station. Public charging, on the other hand, can only be done through a charging station when you're on the go, because using a wall plug won't suffice. The speed at which your EV charges is influenced by the type of charging station or EVSE used, as well as your EV's maximum charging capacity. The table below shows all the available charging options for your VinFast VF 9 Standard Range, as well as the estimated time needed to fully charge the battery from empty.
Europe
Charging an electric vehicle (EV) in Europe can differ depending on the country. Some European countries primarily use 1-phase connections to the grid, while others mostly rely on a 3-phase connection. The table below exhibits all possible ways of charging a VinFast VF 9 Standard Range. Nevertheless, some charging modes may not be offered in certain countries. We suggest checking with your local electric vehicle charging networks to determine which charging options are available to you.
Type 2 (Mennekes - IEC 62196)
Charging Point
Max. Power
Power
Time
Rate
Wall Plug (2.3 kW)
230V / 1x10A
2.3 kW
47h15m
8 km/h
1-phase 16A (3.7 kW)
230V / 1x16A
3.7 kW
29h15m
14 km/h
1-phase 32A (7.4 kW)
230V / 1x32A
7.4 kW
14h45m
27 km/h
3-phase 16A (11 kW)
400V / 3x16A
11 kW
10 hours
40 km/h
3-phase 32A (22 kW)
400V / 3x16A
11 kW †
10 hours
40 km/h
† = Limited by on-board charger, vehicle cannot charge faster.
Fast Charging (10 → 80%)
Fast charging is essential for extending the distance of your journey by adding an optimal amount of range in the shortest possible time. Once the battery reaches 80% state-of-charge, charging power will decrease noticeably. Therefore, a typical fast charge seldom exceeds an 80% SoC. The charging speed of an electric vehicle depends on both the charging station used and the maximum charging power that the EV can handle. The table below provides a comprehensive overview for fast charging the VinFast VF 9 Standard Range on our charging station website.
Max. Power: maximum power provided by charge point
Avg. Power: average power provided by charge point over a session from 10% to 80%
Time: time needed to charge from 10% to 80%
Rate: average charging speed over a session from 10% to 80%
Note: The given energy consumption and range data, influenced by moderate driving and climate conditions, might not match actual driving experiences. Pricing info could vary across regions or markets. This site's content is for only informational purposes, not specifc advice for you.
Contact Electrly
See all photos