Did you know that you have two options for charging your VinFast VF 8 Plus Standard Range electric vehicle? You can charge it using a standard wall plug or a dedicated charging station. However, when you're on the go, public charging can only be done through a charging station since a wall plug won't provide enough power to charge the vehicle. The speed at which your car charges depends on the type of charging station or EVSE used, as well as your car's maximum charging capacity. Take a look at the table below, showing all available charging options for your VinFast VF8 Plus Standard Range, including the estimated time required to charge the battery from empty to full.
Europe
Electric vehicle (EV) charging options in Europe vary depending on the country. Some European nations primarily use 1-phase connections to the grid, while others mainly use 3-phase connections. The following table outlines all the available methods for charging a VinFast VF 8 Plus Standard Range. However, certain charging modes may not be available in certain countries. It is recommended that you confirm which options are accessible to you by contacting your local electric vehicle charging network.
Type 2 (Mennekes - IEC 62196)
Charging Point
Max. Power
Power
Time
Rate
Wall Plug (2.3 kW)
230V / 1x10A
2.3 kW
42 hours
10 km/h
1-phase 16A (3.7 kW)
230V / 1x16A
3.7 kW
26h15m
15 km/h
1-phase 32A (7.4 kW)
230V / 1x32A
7.4 kW
13h15m
30 km/h
3-phase 16A (11 kW)
400V / 3x16A
11 kW
9 hours
44 km/h
3-phase 32A (22 kW)
400V / 3x16A
11 kW †
9 hours
44 km/h
† = Limited by on-board charger, vehicle cannot charge faster.
Fast Charging (10 → 80%)
Quick charging plays a crucial role in increasing the range of your journey by providing an optimal amount of range in the shortest possible time. Once the battery reaches an 80% state-of-charge, the charging power gradually reduces. Therefore, a typical rapid charge seldom exceeds 80% SoC. The fast charging rate of an electric vehicle depends on both the charging station used and the maximum charging power the EV can handle. The following table offers a detailed overview for fast charging the VinFast VF 8 Plus Standard Range.
Max. Power: maximum power provided by charge point
Avg. Power: average power provided by charge point over a session from 10% to 80%
Time: time needed to charge from 10% to 80%
Rate: average charging speed over a session from 10% to 80%
Note: The given energy consumption and range data, influenced by moderate driving and climate conditions, might not match actual driving experiences. Pricing info could vary across regions or markets. This site's content is for only informational purposes, not specifc advice for you.
Contact Electrly
See all photos