Are you familiar with the two charging options available for your Lucid Air Pure? You can choose from using a standard wall plug or a charging station. However, when it comes to road trips, the charging station is the only viable option as the wall plug isn't effective. The speed at which your EV charges depends on the type of charging station or EVSE you use, as well as your EV's maximum charging capacity. Refer to the chart below for an overview of all available charging options for your Lucid Air Pure, including the estimated time it takes to charge your battery from empty to full.
Europe
Charging an electric vehicle (EV) in Europe may vary depending on the country you are in. Some countries use a 1-phase connection to the grid, while others mainly use a 3-phase connection for charging. If you own a Lucid Air Pure, you can choose from various charging methods listed in the table below. However, not all charging modes may be available in some countries. Thus, it is advisable to check with your local electric vehicle charging networks to know which charging options are accessible in your area.
Type 2 (Mennekes - IEC 62196)
Charging Point
Max. Power
Power
Time
Rate
Wall Plug (2.3 kW)
230V / 1x10A
2.3 kW
45 hours
12 km/h
1-phase 16A (3.7 kW)
230V / 1x16A
3.7 kW
28 hours
20 km/h
1-phase 32A (7.4 kW)
230V / 1x32A
7.4 kW
14 hours
40 km/h
3-phase 16A (11 kW)
400V / 3x16A
11 kW
9h30m
59 km/h
3-phase 32A (22 kW)
400V / 3x32A
22 kW †
4h45m
110 km/h
† = Limited by on-board charger, vehicle cannot charge faster.
Fast Charging (10 → 80%)
Fast charging is essential to extend the range of your journey by adding the maximum amount of range in the shortest time possible. When the state-of-charge (SoC) reaches 80%, the power output of fast charging stations decreases significantly. Therefore, a regular fast charge often ends at 80% SoC. The speed at which an electric vehicle charges depends on the charging station and the maximum charging power that the EV can handle. The chart below summarizes the fast charging capabilities of the Lucid Air Pure in detail.
Max. Power: maximum power provided by charge point
Avg. Power: average power provided by charge point over a session from 10% to 80%
Time: time needed to charge from 10% to 80%
Rate: average charging speed over a session from 10% to 80%
Note: The given energy consumption and range data, influenced by moderate driving and climate conditions, might not match actual driving experiences. Pricing info could vary across regions or markets. This site's content is for only informational purposes, not specifc advice for you.
Contact Electrly
See all photos