Are you aware of the two charging methods available for your ORA Funky Cat 63 kWh? Using a traditional wall plug or a charging station are your choices. However, when traveling, relying on a charging station is necessary, as using a wall plug won't suffice. Charging times vary based on the charging station or EVSE you select and your EV's highest charging capacity. Refer to the below table, which displays all the charging options offered for your ORA Funky Cat 63 kWh, including the approximate time required to fully charge the battery from empty.
Europe
The process of charging an electric vehicle (EV) in Europe differs from one country to another. Some European countries heavily rely on 1-phase grid connections, whereas others predominantly use a 3-phase connection. Refer to the table below for a comprehensive list of charging options for an ORA Funky Cat 63 kWh. Nonetheless, some charging modes may not be available in certain countries. It is advisable to seek information from your local electric vehicle charging networks to ascertain which options are accessible to you.
Type 2 (Mennekes - IEC 62196)
Charging Point
Max. Power
Power
Time
Rate
Wall Plug (2.3 kW)
230V / 1x10A
2.3 kW
30h30m
11 km/h
1-phase 16A (3.7 kW)
230V / 1x16A
3.7 kW
19 hours
18 km/h
1-phase 32A (7.4 kW)
230V / 1x32A
7.4 kW
9h30m
36 km/h
3-phase 16A (11 kW)
400V / 3x16A
11 kW
6h30m
52 km/h
3-phase 32A (22 kW)
400V / 3x16A
11 kW †
6h30m
52 km/h
† = Limited by on-board charger, vehicle cannot charge faster.
Fast Charging (10 → 80%)
Fast charging is crucial to increase the distance of your journey by adding the optimal range in the shortest possible time. However, when the battery reaches an 80% state of charge, the charging power will decrease significantly. Therefore, a typical fast charge will typically not exceed an 80% state of charge. The fast charging speed of an electric vehicle depends on both the charging station and the maximum charging power that the EV can handle. Below is a table providing a comprehensive overview of the fast charging process for the ORA Funky Cat 63 kWh.
Max. Power: maximum power provided by charge point
Avg. Power: average power provided by charge point over a session from 10% to 80%
Time: time needed to charge from 10% to 80%
Rate: average charging speed over a session from 10% to 80%
Note: The given energy consumption and range data, influenced by moderate driving and climate conditions, might not match actual driving experiences. Pricing info could vary across regions or markets. This site's content is for only informational purposes, not specifc advice for you.
Contact Electrly
See all photos